This device is able to sample the cargo liquid from cargo tank through Self-Closing Type Vapor Lock Model ANK-52 / ANK-52F.
The device consists of a Graduated Tape Reel Device [to lower and raise the Sampling Bottle in tank], Sampling Barrel, Sampling Bottle, and Sample Filler.
"Tape Reel Device" Model "GTR/W" is assembled with a Frame, a Tape Reel, and a Handle Mechanism for rotating of the Tape Reel.
The Graduated Stainless Steel Tape (JIS 1ST class) is wound in the reel, a Hook is fitted at the end of the Graduated Tape to hang Cargo Liquid Sampling Bottle.
Cargo Liquid Sampling Bottle Model "05L43D" is capable of sampling 0.5 liter capacity.
The container is designed as bottle shape to pass smoothly through the sounding pipe installed in tank, also to avoid contamination with dust or rust inside the sounding pipe.
Liquid sampling can be achieved at any required level by joggling (pumping action), due to the check valve mechanism (Teflon made ball) at the bottom of the Sampling Bottle.
Sampling Barrel Model "51S600" is to be stored Sampling Bottle, also to be connected between Tape Reel Device and the Sampling Filler.
Sample Filler Model "SF-N/R":
The sampled liquid can be filled directly to the sampling bottle.
In general, the Liquid Container (Bottle) shall be arranged at the port terminal by the cargo owner or the cargo surveyor.
This sample instrument is arranged for the various size of the narrow-mouthed liquid container, so, the sampled liquid shall be filled to the liquid container while it is fit/held to the outlet by hand.
In case the container (bottle) with wide-opening type (I.D. over ƒ³28MM/less than ƒ³40MM, O.D. less than ƒ³50MM) shall be arranged, MMC prepares the Container Holder [for purpose of gas-tight] like chemical use. [option]
